Device Reset; Other Functions Of The Technical Menu - Bpt Opale Wide Benutzerhandbuch

User Guide
DEVICE SETUP
Bus version: 0.10
SW version: 2.06
L
HW version: 1.00
Serial Number: F347820083A
40
M
N
O
P

Device reset

If device reset is necessary due to malfunctions, interventions or other technical
reasons . lightly press the button located in the side recess on the device's right-
hand side (see figure) .
Note:
This operation does NOT delete any programmes that will be restored when the unit
is restarted.

Other functions of the technical menu

Pressing the button enables an automatic re-
L
sponse to intercom calls coming from other exten-
sions .
Activating the button, in systems equipped with
M
porters, shows the and
menu .
Activating the switch enables the presence of
N
the automatic door lock release push-button on the
opening screen .
Button O, enables the selection of the image
zoom size on the display .
Aspect ratio 4:3 active .
Aspect ratio 16:9 active . In the instance of an ex-
ternal call, the image of the caller is displayed in 16:9
format and the control buttons are hidden; they
re-appear once the display has been touched again .
The button allows selection of the standard of
P
the video signal of the system, either PAL or NTSC .
Standard PAL activated .
Standard NTSC activated .
opale wide
buttons on the main
33
EN