Loading Packs - Autonumis Brasserie Serie Installations- Und Bedienungsanleitung

Filling The Dispenser
If you have been supplied with a 'bag in box' carton for your dispenser, follow
the instructions below.
Please note that the "Raised Cooling Shelf" is required when dispensing
Smoothies. This part is available through our sales department. See "Spares
Parts Ordering" within this User Guide.
Release the door catch on the machine and remove the used pack.
Clean the interior of the machine if necessary (see Cleaning
Routine).
Open the pack as instructed on the carton. Now place the full pack into
the cabinet with the dispense tube facing downwards at the front of the
machine.
Feed the dispense tube down through the dispense valve whilst
pushing the operating lever (Fig 4a).
When the tubing is fully through the dispense valve, release the
operating lever.
Close the door and door-catch. You can now cut the sealed end of the
dispense tube (Fig 4b).
If you are using the optional basket for bag only products, then follow the
appropriate instructions below.
Open the wire basket provided and place a full bag within. On some
models basket hooks are provided to secure the bag (Fig 5). Ensure
that the plastic nozzle with the attached tube is located in the
corresponding basket slot (Fig 6), then close the basket.
Replace the filled product basket into the dispenser in an upright
position. For the product to be dispensed properly you must ensure
that the tube is free and hanging vertically.
Feed the dispense tube down through the dispense valve as per the
'bag in box' carton instructions above (Fig 4a).
English

Loading Packs

03