Operation; Cleaning And Maintenance - HQ Power HQLE10018 Bedienungsanleitung

4.2 Second Attachment
When hung, the luminaire must always be secured with a secondary attachment e.g. a safety cable.
5. Overview
Refer to the illustrations on page 2 of this manual.
1 receiver remote control
2 bracket
3 power input
4 microphone
Remote Control
auto mode on
sound mode on
blackout
strobe start/stop
Other buttons have no function.
6.

Operation

1. Connect the device to the mains using the included power adapter.
2. Adjust the sensitivity level with the sensitivity control. Use the remote control to select the desired
colour mode.
3. Disconnect from the mains after use.
Modes
mode function
1 blackout
2-6 strobe speed, slow to fast
7 full on
8 sound mode
7.

Cleaning and Maintenance

Before starting any cleaning or maintenance activities:
1. Unplug the device's power cord from the outlet.
2. Let the device cool down.
Cleaning

Use normal glass cleaner and a soft cloth to wipe off the outside casing.

Clean the external optics with glass cleaner and a soft cloth every 20 days.

Always be sure to dry all parts completely before plugging the unit back in.

Cleaning frequency depends on the environment in which the unit operates (i.e. smoke, fog residue,
dust, dew).

Do not immerse the device in any liquid.
V. 01 – 13/02/2017
HQLE10018
5 power LED
6 sensitivity control
7 mode control
8 UV on-off button
5
strobe rate down
strobe rate up
UV on-off
white on-off
©Velleman nv