Herunterladen Diese Seite drucken

Sennheiser DSP-360 Kurzanleitung Seite 2

Vorschau ausblenden Andere Handbücher für DSP-360:

Werbung

PROZESSOR-EINSTELLUNG VERÄNDERN
SELECTING THE PROCESSOR MODE
SELECTION DU MODE PROCESSEUR
Auswahl mit kurzen Tastendruck:
- 3-D-Boost speziell bei Filmwiedergabe,
- A.V.C. Lautstärkebegrenzung,
- DSP-Grundeinstellung
Selection by briefly pressing the button:
- 3D Boost for 3D simulation when watching a film
- Automatic volume control
- DSP basic function
Sélection par une brève pression sur le bouton :
- Amplification 3D pour simulation 3D quand on regarde un film
- Contrôle automatique du volume
- Fonction DPS de base
Auswahl mit kurzen Tastendruck:
- 3-D-Boost speziell bei Filmwiedergabe,
- DSP-Grundeinstellung
Selection by briefly pressing the button:
- 3D Boost for 3D simulation when watching a film
- DSP basic function
Sélection par une brève pression sur le bouton :
- Amplification 3D pour simulation 3D quand on regarde un film
- Fonction DPS de base
PRÜFFUNKTION FÜR RICHTIGE AUFSTELLUNG UND
5
ANSCHLUSS IHRER ANLAGE.
Halten Sie die Taste länger gedrückt, erscheint ein Rauschen, das sich
scheinbar im Uhrzeigersinn im Raum dreht.
Nehmen Sie keine Drehung wahr oder läuft das Rauschen gegen den
Uhrzeigersinn, sind die Lautsprecheranschlüsse verpolt oder vertauscht
oder die Anschlüsse des DSP-360 seitenvertauscht.
TEST FUNCTION FOR CORRECT POSITIONING
AND CONNECTION OF THE SYSTEM
If you keep the button pressed for a longer time, hissing
noise appears to move around in space clockwise.
If the noise does not appear to rotate or if the noise
rotates anticlockwise, the loudspeaker connections are
polarized the wrong way round or inverted or the
connections of the DSP-360 are inverted.
FONCTION TEST POUR LE POSITIONNEMENT
CORRECT ET LE RACCORDEMENT DU SYSTEME
Si vous maintenez la pression sur le bouton, un bruit sifflant apparaît, se
déplaçant autour de l'aire d'écoute dans le sens des aiguilles d'une montre.
Si le bruit ne semble pas tourner ou si le bruit tourne en sens anti-horaire,
c'est que les enceintes ne sont pas raccordées dans le bon sens, inversées,
hors phase ou encore que les branchements du DSP-360 sont inversés.
KURZANLEITUNG
SHORT INSTRUCTIONS
MODE D' EMPLOI SUCCINT
Sennheiser Irland GmbH
D-30900 Wedemark
Printed in Ireland
Publ. 09/98
77069 / A 01

Werbung

loading