Werbung
Verfügbare Sprachen
Verfügbare Sprachen
MOUNTING ot the SOUND COLUMNS / LOUDSPEAKERS
ATTACHING THE SOUND COLUMNS
1 Screw the fixing plate loosely onto the speaker plate (2x allen screws M6 x 12 mm and washers)
2 Slide the groove of the sound column over the fixing plate
3 Once the desired position is reached, tighten both allen screws firmly
DIMENSIONS & SETTING RANGES
TILT ANGLE (stepless from +10º to -30º)
5 To adjust the inclination, turn the vertical
5
allen screw.
CHECKING, MAINTENANCE, CLEANING
- During maintenance work, watch out for possible injuries.
- Check the tightness of the screw connections regularly.
- Clean with a damp cloth and a non-abrasive detergen.
FAULT FINDING (F) AND REPAIR (R)
F: Sound column / loudspeaker wobbles
F:
B: Tighten screws or check suitability of the loudspeaker
F: Sound column / loudspeaker swivel to the side
F:
independently
F:
B: Tighten screw connection X and/or align wall plate
F: B:
vertically Y
DIRECTION
The speaker plate can be swivelled 90º in
each direction.
If necessary, loosen the screw connection X
and tighten it again.
TECHNICAL DATA
Material
Load
Dimensions
Weight
F
ATTACHING THE LOUDSPEAKERS
Check first speaker for suitability:
- threaded bushes M6, at a spacing of 70 mm
4 Screw the loudspeaker to the speaker plate using
4
the two M6 x 12 mm allen screws and washers.
INCLINE WALL PANEL
If necessary, loosen wall screw connection Y and
turn wall plate (up to 15º in each direction).
Then tighten the screws Y again.
Tubes, plates: steel, black powder coated
Connecting elements: steel, zinc plated
Caps: PE
Sound columns / Loudspeakers, max. 10 kg
Wall plate: 70 x 130 mm
Speaker plate : 40 x 98,5 mm
Wall distance: 105 mm
0.75 kg
KÖNIG & MEYER GmbH & Co. KG
Kiesweg 2, 97877 Wertheim, www.k-m.de
24180-000-55/57 Rev.11 03-80-223-00 4/19
Werbung
