Warranty; Battery Removal - Silk'n ToothWave H7001 Bedienungsanleitung

11. Warranty

Please refer to the separate product warranty booklet for
EN
complete information.

12. Battery removal

At the product's end of life, you are required to remove the
battery before disposal. To do this, the device must be opened
up. The device will no longer function after this procedure, nor
can it be repaired. Any warranty will be void when the device
casing is opened and the battery is removed. Home Skinovations
Ltd is not liable for any physical or material damages as a result of
performing this procedure.
1. Remove the device from the charging cradle (#7) and
make sure the battery is empty.
2. Remove the brush head (#1) from the handle (#2).
3. Open the casing: Use a small
tool (e.g., screwdriver or utility
knife), to detach the bottom cover
from the rest of the device.
4. Remove the inner section:
Place the handle (#2) upside
down on a sturdy table. Use the
tool to move the clips inwards. As
the clips release, you will be able
to remove the inner section and
lay it on the table.
14