DJI RONIN-SC Kurzanleitung Seite 5

D. Charging the Battery
Before using for the first time, charge the grip through the
power port using a power cable (included) and a USB adapter
(not included). It is recommended to use a 5V/2A USB adapter.
Power Outlet
100 - 240 V
E. Checking the Battery Level
During charging, the battery level
indicators indicate the battery level.
When not charging, press the battery
level button to check the battery level.
F. Powering On/Off and Sleep Mode
Press and hold the power button
Tap the power button to enter sleep mode. Tap again to exit
sleep mode.
Ronin-SC can be operated during charging.
Activating Ronin-SC
Ronin-SC needs to be activated through the Ronin app before
using for the first time.
1. Press and hold the power button to power on the gimbal.
2. Enable Bluetooth on your mobile device and launch the
Ronin app. Note that a DJI account is required to launch
the Ronin app. Once detected in the list of Bluetooth
devices, select Ronin-SC and input the default Bluetooth
password: 12345678.
3. Make sure you are connected to the internet and follow the
on-screen instructions to activate Ronin-SC.
© 2019 DJI OSMO All Rights Reserved.
4
USB Power
Adapter
to turn Ronin-SC on or off
Ronin-SC
Device Activation
Activation is required prior to using the
device. To do so, information regarding
your device and DJI account will be
uploaded to DJI. Please agree and
proceed to activation.
Agree and activate
User Profile Status
Create
Power Port
High Low