LifeView FlyTV Platinum Benutzerhandbuch Seite 16

The LifeView TVR
Fine Tuning
The Fine Tuning feature allows you to fine-tune your channel frequencies. Slide the
Fine Tuning button to the left or right to make minor adjustments to the frequencies. To
save your changes, click Save this Frequency, or you can click Default to go back to
the default setting.
4.5.2 Fully Scan tab
This box lets you do a full scan for
channels, as well as input frequencies to
create channels. If you wish to use this
option, check the Use Full Scan
Channel List checkbox.
Min Freq. To Max Freq. Scan
This will scan through all available
frequencies to detect available channels.
Click Start Scan on the box that appears
to start the full scan; click on Stop Scan
to stop scanning. The scan will take a
while to complete.
Channel Edit
Here, you can edit channels detected, or
add your own channels by entering a
frequency. To name to a channel, select
it from the Channel List, type a name into
the Key In The Channel Name box, and
click on Save or Add a new channel.
To remove a channel, enter a
Frequency, or adjust the current
frequency with the +/- Hz buttons and
click Save or Add a new channel. To
remove a channel, select it from the
Channel List and click Remove this
Channel.
10