Topcom 2000 Bedienungsanleitung Seite 22

TOPCOM Outdoor Sportswatch 2000
15.3.2 IDLE MODE
• If no button is pressed for about 1 minute, the Watch
will go to the IDLE Mode automatically.
• To activate the compass again, press any button
except the [EL] and [SR] button.
15.3.3 DISTORTION
• If distortion is detected, the indicator "OFF CALL" with
flashing direction digits will appear.
• Please refer to the coming chapter 14.8 - "Calibrating
the Compass" to restore the compass to normal
operation when distortion occur.
15.4 BACKWARD BEARING
The Watch includes a backward bearing function.
• The backward bearing direction is the
bearing direction that on the opposite
direction from normal bearing direction.
• When the 'Backward Bearing' indicator "
" is appeared, the Watch is showing the
backward bearing direction of the navigation
direction.
• In Compass Mode, press the [S/S] button to
select between normal and backward
bearing direction.
22
COMP
COMP
305
1
0
COMP
[S/S]
0
2
COMP
125
0