Herunterladen Inhalt Inhalt Diese Seite drucken

Steam Ironing; Steam Shot; Vertical Ironing - Marta MT-1101 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

If fabric is mixed (e.g. 60% synthetics, 40% cotton) set the thermostat to the temperature of the fibre which requires lower temperature.
Set the thermostat to position with fabric requires. The light indication is on while the appliance is heating up. When the iron reaches operational temperatire the light is off. You can start ironing.
Mark
Fabric
Synthetic
Silk/Wool
Cotton/Linen

STEAM IRONING

Unplug the appliance.
Set steam selector to «OFF» position.
Open water tank lid.
Pour water slowly into water tank with measure cup. Don‟t exceed «MAX» mark.
Close the lid.
Put the iron in a vertical position.
Plug the appliance in.
Set temperature with thermostat according to signs on clothes label.
Wait till light indication is off. That means that the appliance reaches operational temperature.
Set steam selector to required position.
NOTE: The iron gives off steam continuously only if it is hold horizontally and if you use high temperature setting. If the temperature is not high enough the steam is not vapourized and
water could leak from the soleplate's holes.
To cancel steam ironing set steam selector to «OFF» position.
CAUTION: Steam temperature is extremely hot! Avoid any contact with steam or hot water!

STEAM SHOT

Use steam shot to generate a powerful burst steam that can penetrate fabric and smooth the most difficult and tough creases.
Set thermostat to •• or ••• position.
Set steam selector to required position.
Wait till light indication is off.
Press shot-steam button.
Wait several seconds and press the button again.
CAUTION: Steam temperature is extremely hot! Avoid any contact with steam or hot water!
NOTE: Steam shot could be used only at high temperature. Stop steam shot using when light indication is on. Go on when the light indication is off.
You can use steam shot function for vertical ironing.

VERTICAL IRONING

Set thermoregulator to •• or ••• position.
Set steam selector to required postion.
Thermostat mode
·
low temperature
··
medium temperature
···
high temperature
Forbidden to iron
13

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Mt-1102

Inhaltsverzeichnis