Yedoo oops Bedienungsanleitung Seite 5

Safety measures
The balance bike in its basic equipment is designed for
riding during daylight in areas meant for sport and recreation.
For roads with car tra ic or for riding in the dark, you need
to provide your balance bike with safety features (lights,
reflectors, etc.) in accordance with the regulations valid in
your country.
Make sure the children obey general safety regulations or
tra ic rules and that they use use protective accessories
(helmets, knee and elbow pads, good shoes, etc.)
Before each ride, always check good function of the brakes
and the overall technical condition of the balance bike. Do not
exceed the maximum loading capacity of the balance bike
(as specified on the front side). The balance bike is designed
for one rider only! Do not overload the balance bike, it is not
intended for jumping or acrobatic riding. All the speed-limiting
mechanisms (brake pads or discs, rims, and tires etc.) can
become warm when used. For this reason, it is not recommend-
able to touch them before cooling o !
Riding instructions
Children can use the balance bike only under the supervision of
an adult. It is important that the child always grips the handles
with both hands at when riding. While seated and balancing,
the child pushes o alternating the feet as when running or
walking fast. Warning: Children can develop a considerable
speed, so they should be properly instructed about the possible
dangers and braking methods by the parent or the responsible
adult. For braking, the child should squeeze the brake lever
on the handlebar or should use soles of his/her shoes to slow
down by puting them to the ground. Warning: sudden violent
braking may cause injury.
Maintenance
Correct and regular maintenance increases safety and
lengthens the life span of the balance bike. Regularly inspect
screw connections, quick releases, pressure in tires and
lubricate the moveable parts (wheels, bearings, handlebars
bearings, cables, brake parts etc.).
Make sure that no lubricant gets on the rims or brake pads.
Grease reduces their e ect! If this situation occurs, it is
necessary to remove the grease from all the parts, using
a solvent and/or degreaser. Inspect the tires for cuts, nicks
and deformities. Replace tires that show excessive wear and
damage with an equivalent tire. Inspect the self-locking nuts.
If they get loose freely, exchange them with new ones.
Check the spokes for defects. Irregular strain or looseness
in spokes can cause their cracking or can make the wheel
wobble.
Keep the balance bike clean, use soft cloth moistened with
water. It should be stored inside, on a dry and shaded place.
Do not expose the balance bike to high humidity or extreme
temperatures over a long period of time. Before the winter,
EN
prepare it against corrosion. The producer does not cover
damage caused solely by neglected maintenance, non-
adequate adaptation, or inappropriate treatment and storage.
The product complies with the corresponding EU standards
(ČSN EN 71-1, ČSN EN 71-3) and received quality and safely
certifications from a leading Czech testing lab – Engineering
Test Institute (Strojírenský zkušební ústav, s.p.).
Producer: INTREA – PIKO, s. r. o., Sasanková 2657/2,
106 00 Prague 10, Czech Republic, www.yedoo.eu
Warranty list
General regulations:
The content, extend and duration of the warranty conforms to
the valid legal code in the respective country of the purchase
of the running bike.
Warranty period:
The buyer of the new Yedoo balance bike (product) can
apply the warranty during the period of 24 months from
the purchase. The warranty commences on the day of the
sale to the end user and is automatically extended when
the product is taken into repair during warranty period.
Warranty application:
The warranty must be filled out with the retailer, where
the product was purchased (see bellow). When applying
the warranty, we recommend presenting the filled out sheet
bellow, the receipt and a complete and cleaned product.
The seller will give a written confirmation to the buyer
regarding the acceptance of the product into the warranty
process.
Warranty conditions:
The product must be assembled following the instructions of
the manual. The products shall only be used for the purposes,
which it was designed for. The product must be stored and
maintained in the ways in accordance with the Instruction
manual. The warranty does not cover damage caused by
common wear and tear is not covered by this warranty. The
producer does not cover damage caused by incorrect assembly
or by use in contradiction with the Instruction manual.
Product model:
Serial number of the frame:
Date of purchase:
Retailer:
Signature and stamp:
Úvod
Montáž, seřízení a pravidelnou údržbu doporučujeme svěřit
odbornému cykloservisu. Neodborné zásahy mohou vést
k poškození odrážedla či nehodě s vážnými zdravotními následky.
Pokud jste ale technicky zdatní, ničeho se nebojte a s chutí
se do montáže pusťte s námi.
Dotazy, připomínky a náměty na zlepšení našich výrobků
nám prosím posílejte na e-mail: info@yedoo.cz.
Více informací ze světa
odrážedel a seznam distributorů
najdete na www.yedoo.cz.
9
8 9
CZ