laguna STATUARY 2 Bedienungsanleitung Seite 4

this plug will fit in a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician. Never use with an exten-
sion cord unless plug can be fully inserted. Do not attempt to
defeat this safety feature.
12. The pump must be immersed in water. The pump must not
run dry.
SAVE THESE INSTRUCTIONS
13.
For the complete use and understanding of this pump it is rec-
ommended that this manual is thoroughly read and under-
stood. Failure to do so may result in damage to this pump.
ADDITIONAL INSTRUCTIONS FOR U.S.A. ONLY
CAUTION – RISK OF ELECTRIC SHOCK! Do not remove cord and
strain relief. Do not connect conduit to pump.
WARNING – To reduce risk of electric shock, use only on portable,
self-contained fountains no larger than 5 feet in any dimension.
DESCRIPTION
Laguna Statuary Pumps are designed to perform a variety of jobs
that require a submersed circulating pump. Assorted uses include
indoor or outdoor statuary fountains and waterfalls as well as hydro-
ponic units and aquarium sumping. Wherever water needs to be
transported reliably and economically, Laguna Statuary Pumps are
the right choice for the job. They are hermetically sealed with totally
inert epoxy over all electrical connections to ensure safety and long
lasting life. Since they do not employ older technologies requiring oil
cooling, they can never leak or contaminate the area with a coolant.
They are designed to run continuously underwater in either fresh or salt
water environments.
Laguna Statuary Pumps are not recommended or designed to
transport corrosive or flammable compounds or liquids with
different properties than water.
Maximum water temperature must remain under 35˚C.
Laguna pumps contain many technical innovations in design, safety
and utility. All Laguna pump motors are hermetically sealed with all