Before Use - Alfa Pizza achille Bedienungsanleitung

BEFORE USE

- Remove the protective film from all surfaces, to facilitate removal use hot air (e.g. hair
dryer), do not use sharp tools.
POSITIONING THE OVEN
- Install the oven on floors with adequate load-bearing capacity.
- Safety must be the first priority. When the oven is in operation ensure that no other fuel and materials that may
be damaged by heat and sparks are close to it.
- The outer walls of Achille may reach high temperatures greater than 50°C.
- Position the oven so it is not in contact with the wall or other furniture and make sure there is a gap of at least
5 cm alongside and behind the oven if you are using fireproof materials, at least 20 cm if you do not use fire-
resistant materials.
- The upper part of the furnace can not be recessed and must remain free from furniture that compromise the
correct ventilation.
EN
- The oven must be connected to a smoke exhaust system, the smoke discharge must be airtight.
- The accessory works must not rest on the structure of the oven.
- Do not move the oven while it is in use.
TOP VERSION
The oven can also be installed in a top version, on existing plans. It is Important to put the 6 rubber tips on the
base to prevent the floor is not damaged.
16
rubber tip