Inhaltsverzeichnis
Werbung
EN
Fitting Kit
K371W
Use hex screwdriver to reverse adjusting
screw 10 turns.
Press adjusting screw and pull crossbar
legs out. Refer to the crossbar instructions
for crossbar adjustment method.
Ensure each end of the crossbar is
adjusted equally.
Adjust crossbar in or out to suit vehicle.
Refer to the crossbar instructions for
crossbar adjustment.
Attaches to factory-fitted mounting points
Please check the rear of this manual for
information relating specifically to your
vehicle.
4
Werbung
Inhaltsverzeichnis
