Special Controls; Maintenance; Disposal Of Waste Materials - Honeywell equIP Ex-proof Serie Bedienungsanleitung

8.3 Special controls

The camera's web UI supports wiper and washer
setting and control.
Settings can be configured in: CAMERA>>LOGIN>>SE
TUP>>SYSTEM SETUP>>PERIPHERAL
Fig. 10
SPECIAL CONTROLS
Action Preset
Run wiper once 103
when system calls
the preset.
Run washer once 112
when system calls
the preset
Tab. 5
10

9 Maintenance

The pre-installed camera can only be
replaced with one of the same brand and
model.
Read the product HANDBOOK before
performing any operation.
Please provide the device serial number when
requesting any replacement parts.
10 Disposal of waste
materials
The European Directive 2012/19 / EU on Waste
Electrical and Electronic Equipment (WEEE) mandates
that these devices should not be disposed of in the
normal flow of municipal solid waste, but they should
be collected separately in order to optimize the
recovery stream and recycling of the materials that
they contain and to reduce the impact on human
health and the environment due to the presence of
potentially hazardous substances.
The symbol of the crossed out bin is marked
on all products to remember this.
The waste may be delivered to appropriate collection
centers, or may be delivered free of charge to the
distributor where you purchased the equipment at
the time of purchase of a new equivalent or without
obligation to a new purchase for equipment with size
smaller than 25cm .
For more information on proper disposal of these
devices, you can contact the responsible public
service.
Document 800-23092 Rev. A