Remote Control; Connecting The Remote Control; Belt Clip - Philips EXP 503 Bedienungsanleitung

Remote control

Use the AY 3767 or AY 3768 cord remote control.The buttons on the
remote control have the same functions as the corresponding buttons
on the set.

Connecting the remote control

Press 9 twice to switch off the set.
1
2
Firmly connect the remote control to LINE OUT/p on the set.
3
Firmly connect the headphones to the remote control´s socket.
Adjusting the volume
Set VOL E on the set to position 8 and adjust the volume with VOL E
on the remote control.
Note: Select HOLD on the set to prevent the set from being operated
accidentally.

Belt clip

1
Align the belt clip as indicated in the illustration
and press on PUSH to insert the shaped pin of
the clip into the hole in the set.
2
Turn the clip clockwise as indicated to lock the
belt clip to the set.
3
To detach, gently lift the belt clip at the
indicated end and turn it counter-clockwise.
(supplied or optionally available)
Accessories
1
2
27