Control Elements; Installing The Vacuum Cleaner - Dometic CV1003 Montage- Und Bedienungsanleitung

Installing the vacuum cleaner

6.1

Control elements

No. in
fig. 2, page 2
1
2
3
4
7 Installing the vacuum cleaner
!
WARNING! Danger of electrocution and serious injury.
Beware of electrical cables in the wall when drilling and sawing.
A
NOTICE!
•
Mount the vacuum cleaner in a dry place.
•
Do not mount the vacuum cleaner in an area which is subject to
high temperatures.
•
Do not bend the connection cable round sharp edges or cor-
ners. Keep the connection cable away from heated surfaces.
•
To install the vacuum cleaner, the wall thickness must be a mini-
mum of 10 mm and a maximum of 25 mm.
•
Ensure there is a socket nearby which can be used to supply the
vacuum cleaner with power. Do not use extension cables.
•
If the vacuum cleaner is being installed in small spaces with poor
ventilation (e.g. cabinet), then an air outlet and an air outlet grille
with a cross-section of 70 mm must be installed in order to trans-
port warm air generated by the device outside.
➤ Ensure that the dust bag and the motor filter are in place.
➤ Check the vacuum cleaner works prior to installation.
A
NOTICE!
The bolts on the housing must not be screwed out completely
because they are fitted with a spring mechanism.
➤ Mount the vacuum cleaner (fig. 3, page 3 to fig. 9, page 4).
10
Description
I/O switch
Sliding cover
Slider
Motor filter
Explanation
Switches the vacuum cleaner on and off.
Closes up the hose connection on the
device.
Opens the front of the device (e.g. for
changing the dust bag).
Protects the motor from contamination.
CV1003
EN