Dry Ironing - Johnson TopSteam 2300 Bedienungsanleitung

A) Transparent water tank
B) Stainless steel ironing plate
C) Spray nozzle
D) Tank window
E) Steam control
F) Spray button
G) Button for steam jet
H) Thermostat
L) Indicating light
M) Power cord ball-joint
N) "Self-cleaning" button
O) Cup
INSTRUCTIONS FOR USE
To prevent overloads to the electricity net-
work, do not use at the same time as
other high-voltage appliances on the
same circuit
TEMPER TURE CONTROL
Look for the "iron" symbol on the gar-
ments with the dots indicating the correct
temperature to set on the thermostat of
your appliance. Follow these instructions.
If the garment does not have any care
instructions, refer to the following table:
• Nylon and acetate
•• Wool, silk or mixed fabrics
••• Cotton, linen (steam)
These indications relate to the fabric of
the garment and not to any applications
in other materials such as embroideries,
designs, etc. Fabrics with decorations
applied (embossed designs, fabric
designs, embroideries) must be ironed at
a moderate temperature.
If the fabric consists of various fibres,
always choose the temperature suitable to
the fibre that requires the lowest tempera-
ture
P RTS

DRY IRONING

Insert the plug into a compatible power
outlet (the indicating light (L) will light
up).
Position (E) on "0" to exclude the steam
discharge.
Rotate the thermostat (H) until the pre-
selected temperature indication coincides
with the reference triangle on the tank.
The indicating light (L) turns off when the
set temperature is reached.
After checking that the temperature set is
the one most suitable to the type of
fabric, start ironing.
FILLING OF THE W TER T NK
IMPORTANT: to be carried out with the
plug disconnected and the regulator (E)
on the "0" position which excludes the
steam discharge; open the window (D).
Using the cup with the spout (O) slowly
fill the tank (A) with water (do not use
additives). Rest the iron in a vertical posi-
tion and make sure the amount of water
does not exceed the MAX level indicated
on the tank.
STE M IRONING
With the tank full (as indicated in the pre-
vious paragraph), insert the plug into a
compatible power outlet.
Regulate the thermostat (H) to the maxi-
mum temperature (indicated by the
symbol •••).
Wait for the indicating light (L) to turn off
signalling that the temperature has been
reached.
Steam ironing is only possible at an ele-
vated temperature, otherwise water may
leak from the sole plate (B).
Set the amount of steam desired via the
steam control (E).
At this point, it is possible to start steam
ironing until the water is used up.
9