Cleaning And Care - Melinera KH4218 Bedienungsanleitung

Setting up the illuminated Figure
Take the Illuminated Figure from its
packaging.
Remove all transportation fasteners and
tapes/foils.
Place the Illuminated Figure on a
suitable surface.
Carefully pull the two wire elements apart,
on the Christmas tree figure (KH4222)
and the Snowman figure (KH4220),
so that the figures can stand alone.
If necessary, secure the illuminated figures
to the ground with the supplied ground
spikes.
Connect the Illuminated Figure with
a correctly installed 230 V domestic
power wall socket.
When you wish to turn off the illumina-
tion function of the Illuminated Figure,
remove the plug from the wall socket.
During the periods in which the Illumi-
nated Figure will not be in use, please
store it in its packaging.

Cleaning and Care

Risk of potentially fatal
electrical shock:
• First remove the plug from the power
socket.
• NEVER submerse the Illuminated Figure
in water or other fluids!
• Do not allow any liquids to permeate
into the Illuminated Figure.
Before you start cleaning it, allow the Illu-
minated Figure to cool down if need be.
Cleaning the Rope Light:
Clean the rope light with a lightly mois-
tened cloth. NEVER use petrol, solvents
or detergents that can damage plastics!
Maintenance
• The illuminated figure contains no parts
that can be serviced by the consumer.
Disposal
Do not dispose of the device in
your normal domestic waste.
This device is subject to the European
Guidelines 2002/96/EC.
• Dispose of the appliance through an
approved disposal centre or at your
community waste facility.
• Observe the currently applicable regu-
lations. In case of doubt contact your
disposal facility.
Dispose of all packaging materials
in an environmentally friendly
manner.
- 15 -