Advanced Bionics Naida CL AQUACASE CI-7431 Bedienungsanleitung Seite 9

5
Only the PowerCel 110 battery and AquaMic may
be used with the AquaCase.
6
Make sure the processor is powered on and the
selected program supports headpiece (AquaMic)
microphone input. Contact your hearing healthcare
specialist for programming assistance.
Line up the processor headpiece cable connector
(located on the back spine of the Naída CI below the
Program Button) with the cable connector located
inside of the AquaCase. Slide the Naída CI into the
AquaCase until the connection is made.
The Naída CI should fit tightly to the back wall of the
AquaCase and lie flat against the bottom surface.
8
7
Connector
8