Lighting Unit - Franke Fdw 908 Rb Xs Bedienungsanleitung Und Einrichtung

MAINTENANCE
Cleaning the Comfort Panels
• Open the Comfort Panel by pulling it at the top.
• Unhook the security chain by opening the spring catch.
• Disconnect the panel from the hood canopy.
• The comfort panel must never be washed in the dishwasher.
• Clean the outside with a damp cloth and neutral detergent.
• Clean the inside using a damp cloth and neutral detergent; do not use wet
cloths or sponges, or jets of water; do not use abrasive substances.
• On completing the operation, hook the panel and the spring catch up to
the hood canopy again and close it.
These can also be washed in the dishwasher, and need to be cleaned
whenever the "drop" symbol lights up or at least once every 2 months use,
or more frequently if use is particularly intensive.
Resetting the alarm signal
• Turn the Lights and the Suction Motor off.
• Press button B (see paragraph on Use).
Cleaning the Filters
• Open the Door (see USE).
• Open the Comfort panel by pulling it.
• Remove the Filters one at a time, pushing them towards the back of the
unit and at the same time pulling downward.
• Wash the Filters without bending them, and leave them to dry
completely before replacing. (If the surface of the filter changes colour as
time goes by, this will have absolutely no effect on the efficiency of the
filter itself.)
• Replace, taking care to ensure that the handle faces forwards.
• Close the Comfort panel.
Warning: This appliance is fitted with a white LED lamp classed as 1M according to
EN 60825-1: 1994 + A1:2002 + A2:2001 standards; maximum optical power emitted
@439nm: 7µW. Do not look directly at the light through optical devices (binoculars,
magnifying glasses...).
• For replacement contact technical support. ("To purchase contact technical sup-
port")
EN
Metal grease filters

Lighting unit

1 18