Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6.
there is sufficient ventilation for the motor compartment; there is a clearance of at least 30 cm in front of the grill
and a gap of at least 10 cm between the rear cabinet panel and the wall.
8. CLEANING THE CONDENSER (SKILLED PERSONNEL ONLY)
1.
Switch off the appliance by turning off the power switch and pull the plug out of the socket. . Remove the
screws attaching the front grill and remove the grill.
fins.
4.
Use a vacuum cleaner to remove the remaining dust. . Refit the grill and switch on the appliance (see fig.
4).
Our products are for internal use only – do not install outside restaurants, shops.
COLD
MASTER
3.
Using a paintbrush, remove any dust from the condenser's
5
10
2
Werbung
