Torque Specification - Jacobsen Greens King IV Handbuch

4 ADJUSTMENTS

4.19 TORQUE SPECIFICATION __________________________________________________

All torque values included in these charts are approximate and are for reference only. Use of these torque values is
at your sole risk. Jacobsen is not responsible for any loss, claim, or damage arising from the use of these charts.
Extreme caution should always be used when using any torque value.
Jacobsen uses Grade 5 bolts as standard, unless otherwise noted.
AMERICAN NATIONAL STANDARD FASTENERS
SIZE UNITS
#6-32 in-lbs (Nm)
#8-32 in-lbs (Nm)
#10-24 in-lbs (Nm)
#10-32 in-lbs (Nm)
#12-24 in-lbs (Nm)
1/4-20 in-lbs (Nm)
1/4-28 in-lbs (Nm)
5/16-18 in-lbs (Nm)
5/16-24 in-lbs (Nm)
3/8-16 ft-lbs (Nm)
3/8-24 ft-lbs (Nm)
METRIC FASTENERS
SIZE UNITS
M4 Nm (in-lbs)
M5 Nm (in-lbs)
M6 Nm (in-lbs)
M8 Nm (in-lbs)
M10 Nm (ft-lbs)
M12 Nm (ft-lbs)
M14 Nm (ft-lbs)
en-20
GRADE 5 GRADE 8
20 (2.3) –
24 (2.7) 30 (3.4)
35 (4.0) 45 (5.1)
40 (4.5) 50 (5.7)
50 (5.7) 65 (7.3)
95 (10.7) 125 (14.1)
95 (10.7) 150 (17.0)
200 (22.6) 270 (30.5)
240 (27.1) 300 (33.9)
30 (40.7) 40 (54.2)
35 (47.5) 45 (61.0)
4.8 5.8
1.2 (11) 1.7 (15)
2.5 (22) 3.2 (28)
4.3 (38) 5.7 (50)
10.5 (93) 13.6 (120)
21.7 (16) 27.1 (20)
36.6 (27) 47.5 (35)
58.3 (43) 76.4 (55)
NOTICE
AMERICAN NATIONAL STANDARD FASTENERS
SIZE UNITS
7/16-14 ft-lbs (Nm)
7/16-20 ft-lbs (Nm)
1/2-13 ft-lbs (Nm)
1/2-20 ft-lbs (Nm)
9/16-12 ft-lbs (Nm)
9/16-18 ft-lbs (Nm)
5/8-11 ft-lbs (Nm)
5/8-18 ft-lbs (Nm)
3/4-10 ft-lbs (Nm)
3/4-16 ft-lbs (Nm)
7/8-14 ft-lbs (Nm)
8.8
2.9 (26) 4.1 (36)
5.8 (51) 8.1 (72)
9.9 (88) 14.0 (124)
24.4 (216) 33.9 (300)
47.5 (35) 66.4 (49)
82.7 (61) 116.6 (86)
131.5 (97) 184.4 (136)
GRADE 5
50 (67.8)
55 (74.6)
75 (101.7)
85 (115.3)
105 (142.4)
115 (155.9)
150 (203.4)
160 (217.0)
170 (230.5)
175 (237.3)
300 (406.8)
10.9 12.9
5.0 (44)
9.7 (86)
16.5 (146)
40.7 (360)
81.4 (60)
139.7 (103)
219.7 (162)
GRADE 8
65 (88.1)
70 (94.9)
100 (135.6)
110 (149.2)
135 (183.1)
150 (203.4)
195 (264.4)
210 (284.8)
220 (298.3)
225 (305.1)
400 (542.4)
Non Critical
Fasteners
into
Aluminum
2.0 (18)
4.0 (35)
6.8 (60)
17.0 (150)
33.9 (25)
61.0 (45)
94.9 (70)