Installation - Philips AQ 5150 Bedienungsanleitung

Installation

VOLUME
MAINS
FM STEREO 6
SUPPLY
Battery supply
• Open the battery compartment and insert as
indicated six batteries, type R20, UM1 or D-
cells.
6 x R20/UM1/D-cells
• Remove the batteries if exhausted or if they
will not be used again for a long period.
• The battery supply is switched off when the
set is connected to the mains. To change
over to battery supply, pull out the plug from
the MAINS socket.
p HEADPHONES
TONE
PAUSE ;
STOP/EJECT 9
REC 0
F.FWD 5
PLAY 1
REW. 6
Mains supply
• Check if the mains voltage as shown on the
model number plate (on the base of the set)
corresponds to your local mains voltage. If it
does not, consult your dealer or service
organisation.
• If the set is equipped with a VOLTAGE
SELECTOR, set this selector to the local
mains voltage.
VOLTAGE
• Connect the mains lead to the MAINS
socket and the wall socket. The mains
supply is switched on. To disconnect the set
from the mains completely, withdraw the
mains plug from the wall socket.
AQ 5150/00. page 5
TAPE/RADIO
BAND
MIC
TUNING
MAINS
5