Print Server Rename; Otc Button - Medion NAS 3 TB Bedienungsanleitung

Application

21.7. Print Server Rename

Use this window to edit the name of a printer that is used by the NAS server.
Name
Enter a new name here. The name must differ from the names of other
printers that are logged in to the NAS server.
Apply
Click here to accept and save the settings.
Cancel
Click here to exit the settings without saving.

21.8. OTC Button

The OTC button (One Touch Copy) on the front of the server can synchronize
and copy data between the NAS server and a USB data medium that is
connected to the front USB port. You can make all settings for the OTC
button in this menu.
21.8.1. Copy Settings
NAS Copy Target
Select the share on the NAS server where the files are to be stored when
using the copy function of the OTC button.
USB Volume
This displays the USB data medium that was last connected to the front USB
port. If the USB data medium contains several partitions, choose the partition
to which the files are to be stored.
Copy Direction
Select USB -> NAS to copy files from the USB data medium to the NAS
server, or select NAS -> USB to copy the files from the NAS server to the
partition of the USB data medium specified above.
Create a New Folder for Copied Files
Here you can set the system up so that a new folder is created on the NAS
server each time data are copied to the NAS server using the OTC function.
The folders that are automatically created by the NAS server are designated
with the date and time in the folder name.
291 of 344