Cleaning And Maintenance; Data Backup; Power Supply - Medion NAS 3 TB Bedienungsanleitung

In the event of a fault, please contact the Medion Service Centre
to avoid hazards.

2.5. Cleaning and maintenance

• Before you clean the device, always unplug the mains
adapter from the mains.
• Only use a dry, clean cloth for cleaning. Do not use chemical
solutions and cleaning products because these may damage
the device's surface and/or inscriptions.

2.6. Data backup

• Please note! Back up your data on external storage media
after each update. We do not accept any liability for claims
for compensation arising from loss of data or any damages
incurred.

2.7. Power supply

Please note: Even when the device is switched off, some parts of
the device are still energized. To interrupt the power supply to
your device, or to safely disconnect the device from the voltage,
disconnect the device completely from the mains.
• Operate the mains adapter only on earthed socket outlets
with AC 100–240 V ~ 50 Hz. If you are unsure about the pow-
er supply at the setup location, ask your local energy provi-
der.
• Only use the mains adapter provided.
(Ktec KSAD1200150W1EU). Never try to connect the mains
adapter to other sockets as this may cause damage.
• For extra safety, we recommend using an overvoltage
protection device to prevent the appliance from sustaining
damage as a result of power surges or lightning strikes.
• To interrupt the power supply, unplug the mains adapter
from the socket.
• The mains adapter must be easy to access even after being
connected so that it can be quickly disconnected from the
Safety Instructions
233 of 344