Setting Up; Connection To A Network - Medion NAS 3 TB Bedienungsanleitung

6. Setting up

6.1. Connection to a network

 Use a network cable to connect the
server to a network interface with the appropriate socket (e.g. a router).
The NAS server is set up as a DHCP client, so make sure that DHCP is
activated on the router!
 Insert the barrel connector of the mains adapter into the DC IN socket
on the NAS server and then connect the mains adapter to a mains socket
outlet.
 Make sure that the computer you will be using to configure the server is
in the same network.
6.1.1. Connections for USB devices
 You can use the USB ports to connect external USB drives or a USB printer
that will be available to all users in the local network.
The USB port at the front of the server can also be used for the One Touch
Copy function.
PLEASE NOTE!
Before using the One Touch Copy function, read the
corresponding notes in these operating instructions on page
245 and on page 291.
RJ45
socket (Ethernet/LAN) on the
Setting up
239 of 344