Inhaltsverzeichnis
Werbung
GWARANCJA I SERWIS
Warunki gwarancji oraz opis postepowania w przypadku reklamacji
zawarte są w załączonej Karcie Gwarancyjnej.
Serwis Centralny
GTX Service
Ul. Pograniczna 2/4
02-285 Warszawa
Sieć Punktów Serwisowych do napraw gwarancyjnych i pogwarancyjnych
dostępna na platformie internetowej gtxservice.pl
Grupa Topex zapewnia dostępność części zamiennych oraz materiałów
eksploatacyjnych dla urządzeń i elektronarzędzi.
Pełna oferta części i usług na gtxservice.pl. Zeskanuj kod QR i wejdź:
tel. +48 22 573 03 85
fax. +48 22 573 03 83
e-mail service@gtxservice.pl
8
GB
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
CORDLESS SCREWDRIVER
CAUTION: BEFORE USING THE POWER TOOL READ THIS MANUAL
CAREFULLY AND KEEP IT FOR FUTURE REFERENCE.
DETAILED SAFETY REGULATIONS
• Use ear protectors when operating cordless screwdriver. Noise
hazards may cause hearing loss.
• Use additional handles supplied with the tool. Loss of control may
cause operator personal injury.
ADDITIONAL INSTRUCTIONS REGARDING SAFETY FOR SCREWDRIVER
OPERATION
• Read the manual carefully before using the screwdriver.
• Driver bits and drills should be maintained in good technical condition.
Drills should be sharp. This will reduce screwdriver load and ensure its
durability.
• Use driver bits and drills recommended by the manufacturer only.
• All attempts to modify the screwdriver or its accessories are inadmissible.
• Do not overload the screwdriver. Let the tool do the work alone. This
will lower wear of the screwdriver and working tool, ensure greater
working efficiency and tool durability.
• Do not use power supply unit with damaged power cord. Such device
should be repaired or replaced.
• Charger and power tool should be always kept clean (with no traces
of dirt or dust).
• Always disconnect the charger from the mains and the tool from
the charger before commencing any work with the screwdriver (use,
repair).
• Do not use the battery in the screwdriver for other purposes.
• Do not try to disassemble the tool.
• Do not expose the tool to excessive temperature or water.
• When the screwdriver is not used for long period of time store it in
cool and dry place.
• Do not use the screwdriver when you see its casing is discoloured or
damaged.
• Do not discharge the battery completely. When the tool is not used
for a long time, charge the battery from time to time. Completely
discharged battery may leak.
• Do not put the nickel-cadmium batteries into fire or water. They may
explode! Used battery should be taken to recycling point suitable
for this kind of products. Do not dispose of battery to containers for
municipal wastes.
SPECIAL CONDITIONS REGARDING SAFETY OF CHARGER OPERATION
• Keep this manual. It contains important safety rules and rules for
charger use.
• Before using the charger, read all relevant information contained
within this manual, see markings on the charger and the product it
is designed for.
• To reduce the risk of potential personal injury use the charger for
nickel-cadmium batteries only. Other type batteries may explode and
cause personal injury or material damages.
• Do not expose the charger to moisture or water.
• Use of any connecting elements not supplied or not recommended
by the manufacturer of the charger may cause fire, personal injury or
electric shock.
• Make sure the power cord is not located in pathway, it is not exposed
to treading or other danger (e.g. strong tension).
• Do not use extension cord unless it is absolutely necessary. Use
of improper extension cord may cause fire or electric shock. If it is
necessary to use extension cord, first make sure that:
– Extension cord socket matches plug prongs of the original charger
power cord.
– Extension cord is in good technical condition.
• Do not use the charger with damaged cord or plug. Damage should be
repaired by a qualified person.
• Do not use the charger after it has been hit, dropped or otherwise
damaged. Entrust the testing and potential repair to authorized
50G138
Werbung
Inhaltsverzeichnis
