Fuse Replacement - Chauvet SlimPAR Pro Tri Schnellanleitung

EN
Product
Description
Product Overview
AC Power
Power Linking

Fuse Replacement

Mounting
Double-bracketed Bracket for
Floor or Overhead Mounting
Product
Mounting
Diagram
The SlimPAR™ Pro Tri is a low-profile, tri-colored LED par can for use
where wash lights are needed. With silent operation, no moving parts, and
flicker-free operation, the SlimPAR™ Pro Tri is great for quiet venues and
on-camera use.
LED Display
DMX In/Out
This product has an auto-ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
You can link up to 9 SlimPAR™ Pro Tri products at 120 VAC and 16 units
at 230 VAC.
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and
replace with a fuse of the exact same type and rating.
5. Re-insert the fuse holder and reconnect power.
Before mounting this product, read the Safety Notes.
3
SlimPAR™ Pro Tri QRG
Power In
Fuse Holder
Power Out
Bracket Adjustment
Knob