What Is Included; Fuse Replacement - Chauvet INTIMIDATOR BEAM LED 350 Kurzanleitung

EN
What Is
Included
To Begin
Product
Description
Product Overview
AC Power
Power Linking

Fuse Replacement

• Intimidator™ Beam LED 350
• Hanging Bracket with Mounting
Hardware
Unpack your Intimidator™ Beam LED 350 and make sure you have
received all parts in good condition. If the box or contents appear damaged,
notify the carrier immediately, not CHAUVET®.
The Intimidator™ Beam LED 350 is a compact, feature-packed 75W
moving head with a frost effect that can shift the beam to a wash. A fixed
gobo wheel with animation effects and a 3-sided prism that splits the beam
provide complex looks over a large coverage area. Power linking saves time
running cords, and built-in sound-activated programs dance to the beat of
the music.
Power In
Power Out
Safety Loop
This product has an auto-ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
You can link up to 3 Intimidator™ Beam LED 350 products at 120 VAC
and 7 units at 230 VAC.
1. Disconnect the product from power.
2. Using a flat-head screwdriver, loosen the fuse holder and pull straight
out.
3. Remove the blown fuse from the holder and replace with a fuse of the
exact same type and rating.
4. Re-insert the fuse holder and reconnect power.
Intimidator™ Beam LED 350 QRG
• Power Cord
• Warranty Card
• Quick Reference Guide
LED Display
3
Fuse Holder
DMX In/Out