Silvercrest KH 2525 Bedienungsanleitung Seite 55

Cleaning
Operation
Switch the transmission unit on.
Begin playback of the audio device. The display of the status LED
from green to blue.
Switch the speaker on. The status LED
to blue.
Set, as required, the channel and the frequency.
Set the desired volume.
NOTICE
► After 4 minutes without signal reception both the speakers as well as the
transmission unit switch to the standby mode. The respective status LED's
light up green.
Cleaning
Safety instructions
WARNING
Danger from leaking battery acid!
In the case of depleted batteries/rechargeable batteries the leaking fl uids can
cause injuries (skin irritations) or device damage.
► Wash your hands thoroughly.
IMPORTANT
Possible damage to the device.
Penetrating moisture can lead to damaging of the device.
► Make sure when you are cleaning that no moisture gets inside the trans-
mission unit or the speakers in order to avoid irreparable damage to them.
Cleaning
■ Clean the housing exclusively with a soft damp cloth and a mild dishwashing
liquid.
Loudspeaker System KH 2525
3 fi rst lights up green and then changes
GB
changes
2
57