Connecting The Transmission Unit To An Audio Device; Inserting And Connecting The Rechargeable Battery Pack In The Speaker - Silvercrest KH 2525 Bedienungsanleitung

Connecting the transmission unit to an audio device

GB
Audio device with cinch sockets
Audio device with jackplug connection
Inserting and connecting the rechargeable battery pack
in the speaker
54
NOTICE
► Pay attention to the audio device's operating instructions.
Plug the connection cable's
on the transmission unit.
Plug both of the connection cable's
audio output.
Plug the connection cable's
on the transmission unit.
Plug the connection cable's
output. If necessary use the jackplug adapter
NOTICE
► When delivered the rechargeable battery packs are already inserted into
the battery compartment. You need only to connect the rechargeable
battery pack's connection cable to the speaker.
Release both of the battery compartment cover's
the battery compartment cover.
Connect the rechargeable battery pack's connection cable.
NOTICE
► Make sure that the removal strap is placed under the rechargeable battery
pack in order to make removal of the rechargeable battery pack easier.
Put the battery compartment cover back on.
Set the switch to position Charge, if you use the battery packages.
13
NOTICE
► Each speaker can also be operated with 8 size AAA (LR03 - Mico) batteries/
rechargeable batteries. They are not supplied.
► Do not use depleted and new batteries/rechargeable batteries together
and use only batteries/rechargeable batteries of the same type also make
sure that the polarity is correct.
Set the switch to position Normal, if you use 8 batteries/cells of size
13
AAA (LR03 Micro).
Setting up and connecting
jackplug into the AUDIO IN
18
cinch plugs into the audio device's
18
jackplug into the AUDIO IN
20
other jackplug into the audio device's audio
20
19
Loudspeaker System KH 2525
connection
10
connection
10
.
locking clips and remove
14