Werbung
Verfügbare Sprachen
Verfügbare Sprachen
S3358 / EM3357
-
Briefly press the SNOOZE/LIGHT button to activate the display lighting for 5
seconds.
Date and time setting:
All setting buttons are on the rear side of the weather station.
Automatic setting (RCC function)
This weather station is designed to set itself automatically on reception of the radio signal
coming from close to Frankfort in Germany. It allows all European country within approx.
1500 kms radius around Frankfort to benefit from this radio signal. Summer and winter
time settings will be also automatic.
The unit starts searching for the DCF signal automatically after been start up. This
operation can take several minutes to several hours. Please do not hesitate to change of
room for the first reception. The unit automatically adjusts depending on the signal several
times a day.
If you cannot received the signal, you can choose the manual setting:
Manual Date and time setting
-
Press and hold down the "MODE" button for 2 seconds, the Year display 2012
starts to flash. Now use "▲ " and "▼ " buttons to set the correct year.
-
Press SET to confirm your setting, the Month display starts to flash. Now use "▲ "
and "▼ " buttons to set the correct month.
-
Press "SET" to confirm your setting, the Date display starts to flash. Now use "▲ "
and "▼ "buttons to set the correct date.
Language setting
-
Press "SET" to confirm your setting, the language selection for the Weekday
displays starts to flash. Now use "▲ " and "▼ "buttons to select a language.
There are 7 languages of Weekday: English, German, Italian, French, Spanish,
Netherlands, and Danish.
Time setting
Press"SET"to confirm your setting, the Time zones start to flash, Now use" ▲ " and
-
"▼ " buttons to set a correct time zone (-12 to +12).
-
Press "SET" to confirm your setting, the 12/24 hour mode display starts to flash.
Now use "▲ " and "▼ "buttons to set the correct 12/24 hour mode.
-
Press "SET" to confirm your setting, the Hour display starts to flash. Now use "▲ "
and "▼ "buttons to set the correct hour.
-
Press "SET" to confirm your setting, the Minute displays starts to flash. Now use
"▲ " and "▼ "buttons to set the correct minute.
-
Press "SET" to confirm your setting and to end the setting procedures, enter the
clock mode.
After 7 seconds without pressing any button, the clock switches automatically from Set
Mode to Normal Time Mode.
Alarm setting
-
Press once ALARM button, LCD display the "" icon.
-
Press and hold down the ALARM button for 2 seconds until Alarm Time flashing
icon is displayed. Now use the "▲ " and "▼ " buttons to select the alarm time you
require and briefly press the ALARM button to set this Alarm time.
-
The Hour display of the Alarm time starts to flash. Use the "▲ " and "▼ "buttons to
set the required hour. Press ALARM button to confirm your setting
-
The Minute display of the Alarm time starts to flash. Use the "▲ " and "▼ "buttons
to set the required minute. Press ALARM button to confirm your setting and to
end the setting procedure.
-
To activate or deactivate the daily alarms, briefly press the "ALARM" button once.
-
The alarm will sound for 1 minutes if you do not deactivate it by pressing any
button. In this case the alarm will be repeated automatically after 24 hours.
-
Rising alarm sound (crescendo, duration: 1 minutes) changes the volume 4 times
whilst the alarm signal is heard.
-
Automatic SNOOZE function
-
To activate the automatic snooze function: While the alarm is sounding, press the
"SNOOZE/LIGHT" button at the rear side of the weather clock or presse the front
button under the LCD display to activate the snooze function. When the snooze
function is activated, the "Zz" symbol appears in the display.
-
This operation moves the alarm back by 1 to 60 minutes (according to previous
settings) and the alarm will restart at this time.
°C/°F temperature display:
-
The temperature is displayed either in °C or °F. Briefly pressing the"▼ "button
allows you to switch between the individual models.
Radio connection to outdoor sensor:
Werbung
