Werbung
Verfügbare Sprachen
Verfügbare Sprachen
S3358 / EM3357
WEATHER STATION "COLOR MY DAY"
Warning: Please read this instruction manual carefully before using the instrument and
keep it for future use.
1. LCD
2. TECHNICAL DATA:
-
Radio controlled Clock via DCF frequency
-
Manual time setting.
-
Continuous calendar up to year 2099.
-
Date and weekday display.
-
Temperature alternatively in C° or F°.
-
Time in optional 12/24 hour format.
-
Weekday display in 7 languages: English, German, Italian, French, Spanish,
EN
Netherlands, and Danish
-
Automatic snooze function (5 minutes).
-
Thermometer:
Indoor measurement ranges: 0°C (32°F) ~ 50°C (122°F)
Outdoor measurement ranges: -19.9°C (-3.8°F) ~ 59.9°C (139.8°F)
Display Hi/Lo Outdoor Temperature
-
Hygrometer: measurement range: 20% ~ 95% RH. Separate display of indoor use.
-
LED back light display (auto off after 5 seconds).
-
Battery: 2 x AA /LR6 (not included).
-
Transmitter frequency: 433.92 MHz.
-
Range of transmission is up to 60m (200feet).
-
Main adaptor: input 230V/AC; output 4.5V/DC, 200mA (included)
3. INITIAL OPERATION
Obstacles can severely impair the of the transmission.
We recommend a minimum distance of 2.5 meters to all sources of interference, such as
televisions or computer monitors
Radio receiving is weaker in rooms with concrete walls (e.g.: in cellars) and in offices. In
such extreme circumstances, place the unit close to the window.
Protect the transmitter against any direct sunlight penetration.
First use :
-
Open the battery compartment on the rear side of the outdoor remote sensor and
insert the batteries. Pay attention to observe the correct polarity. Close in the
battery compartment
-
Open the battery compartment on the rear side of the receiver and insert the
batteries. Pay attention to observe the correct polarity. Close the battery
compartment.
-
When you insert the batteries, all the icon on the LCD display will briefly light up
for 3 seconds, and you will hear a beep tone, and detect indoor temperature &
humidity.
-
The receiver will now start to make a connection to the outdoor remote sensor.
This operation takes about 3 minutes and is displayed by a flashing reception RF
antenna symbol in the "OUTDOOR" display area on the receiver.
-
After receiver has created a connection to the outdoor remote sensor, it will then
enters the clock mode.
Backlight:
Werbung
