Functions; Setup - Silvercrest STS 12 A2 Bedienungsanleitung

Functions

With this TV simulator you can simulate the fl icker patterns of a
switched-on television and so feign your presence to potential
burglars.
For this purpose 5 diff erent settings are available:
ON: the LEDs light up in diff erent colours and combinations.
DUSK+2HRS: the LEDs switch on automatically at dusk and then
light up for 2 hours.
DUSK+4HRS: the LEDs switch on automatically at dusk and then
light up for 4 hours.
DUSK+6HRS: the LEDs switch on automatically at dusk and then
light up for 6 hours.
OFF: the appliance is switched off .

Setup

Select a suitable location for setting up the appliance. This location
must fulfi l the following criteria:
― The TV Simulator may not be directly visible from outdoors.
― The fl ickering generated by the TV simulator must be visible
on the walls and/or ceiling from outdoors.
― A power socket must be easily accessible.
― The TV Simulator must be installed such that it can be infl u-
enced by the twilight. This means that the fall of light from
outside must be given! It should also be borne in mind that,
the closer the appliance is to a wall, the less light the twilight
sensor 8 will have fall on it.
― The TV Simulator may not be located near a window which
could be well lit from outdoors, such as on a busy street or
next to street lights.
― There should be no additional time-controlled light source in
the room, e.g. a night light.
STS 12 A2
GB
7