Herunterladen Inhalt Inhalt Diese Seite drucken

Oleo-Mac PW 110C Bedienungsanleitung Seite 10

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 28
MAINTENANCE - CHECkING THE WATER INTAkE FILTER
The inlet filter must always be fitted inside the water inlet pipe to filter out sand, limestone and other impurities, as
they will damage the pump valves.
Clean the water inlet filters regularly once a month or more frequently is according to use. Periodically check the
filter in order to prevent clogging, which could jeopardize operation of the pump. To do this, unscrew the connection
coupling for the water inlet hose from the device and clean the exposed inlet sieve by placing it under running water.
CAUTION: Failure to fit the filter will invalidate the guarantee.
The machine should be kept clean so as to let cooling air pass freely through the machine vents.
Pump, hose and accessories should always be emptied of water prior to storing as follows.
1. Stop the machine (press the ON/OFF switch) and detach water hose and accessory.
2. Restart the machine and activate the trigger. Let the machine run until no move water runs through the spray handle.
3. Stop the machine, unplug and detach high pressure hose.
4. Long periods of nonuse: if the machine is going to be stored for longer periods of time (i.e. over three months) in a
room where frost could develop, it is recommended that the machine be filled with an antifreeze solution (similar
to the antifreeze solutions used for vehicles).
5. When the device is not used for an extended period of time, lime deposits begin to form in the motor pump, which
in turn can lead to starting difficulties.
NEvER START UP A FROzEN MACHINE.
Frost damages are not covered by the guarantee!
ENvIRONMENTAL PROTECTION - DISCARDING THE MACHINE
Make the old cleaner unusable immediately: unplug the cleaner and cut the electric cable.
Store the machine in an area that cannot be reached by children.
Do not use any parts from the used machine as replacement parts.
Recycle unwanted materials instead of disposing of them as waste. All tools, hoses and packaging should be sorted,
taken to the local recycling center and disposed of in an environmentally safe way.
This product bears the selective sorting symbol
This means that this product must be handled pursuant to European Directive 2002/96/EC in order to be recycled or
dismantled to minimize its impact on the environment.
For further information, please contact your local or regional authorities.
Electronic products not included in the selective sorting process are potentially dangerous for the environment and
human heath due to the presence of hazardous substances.
When replacing old appliances with new ones, the retailer is legally obligated to take back your old appliance for
disposals at least free of charge.
10
MAINTENANCE - CLEANING OF MACHINE vENTS
STORAGE
for waste electrical and electronic equipment (WEEE).

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis