Xtr-Pro-Dv A2L Dual Voltage Supplimentary; Spare Parts - JAVAC XTR-ALTIMA A2L Bedienungsanleitung

EN
1.0 XTR PRO-DV A2L DUAL VOLTAGE SUPPLIMENTARY
Thank you for purchasing a JAVAC Refrigerant Recovery Machine.
1.1 The XTR-PRO-DV A2L has been designed with the inclusion of a Dual Voltage Compressor and Fan and a Voltage
selection switch for added safety and convenience. The Voltage Selection switch allows the operator the choice of running the
machine at 110 or 230 Volts.
1.2 The XTR-PRO-DV A2L is designed for most CFC's and HFC's, It is not intended for use with A2 or A3 refrigerant such as
butane or propane. The user/technician must be trained and qualified for handling refrigerants before using the XTR-PRO-DV
A2L. Refer to your local codes of practice and legislation.

SPARE PARTS

JAVAC offer a complete range of product spares. Visit our website: javac.co.uk or contact your local wholesaler for details.
1.3 CAUTION: CORRECT USE OF THE DUAL VOLTAGE OPTION (UK ONLY)
This machine has been fitted with a Dual Voltage compressor. It ranges between 115 and 230 Volts 50/60Hz. Please be
aware that if the Voltage selecter switch is NOT in the correct position, severe damage will be caused to this machine.
Disconnect power before switching the voltage
selector switch.
1.4 When the switch is in this position it is set
for 115 Volts 50/60Hz. You will need to use a 110V
3 Pin UK Outlet Plug with an IEC Plug to
the Machine.
THIS LEAD IS NOT SUPPLIED WITH THIS UNIT.
1.5 When the switch is in this position it is set for
230 Volts 50/60Hz. You will need to use a Standard
230V Outlet Plug with an IEC Plug to the machine.
THIS LEAD IS SUPPLIED WITH THIS PACKAGE.
FAILURE TO FOLLOW THESE INSTRUCTIONS
COULD CAUSE DAMAGE TO THE MACHINE
AND ITS SURROUNDINGS AND SERIOUS
HARM TO THE USER.
THIS WILL ALSO VOID ANY WARRANTY.
4
XTR-PRO DV A2L