Using The Scanner Buttons - Canon CanoScan 8800F Kurzanleitung

Using the Scanner Buttons

Using the Scanner Buttons
Scanner buttons allow you to copy, scan, e-mail, and save scanned images in PDF format with a press
of a button. Simply place your document on the scanner, and then press the scanner button for the
required function. For more information, see the Scanning Guide.
PDF Buttons
PDF buttons allow you to easily create PDF
files according to your needs. Note that
these buttons are not labeled on
the scanner.
COLOR Button
Scans color images in A4 or Letter size
at 300 dpi by default.
BLACK & WHITE Button
Scans black & white images in A4 or Letter
*
size at 300 dpi by default.
CUSTOM Button
Scans images in user-specified settings.
FINISH Button
Ends the operation and saves the scanned
image in a PDF file.
*The size may differ depending on your
system environment.
• Before using scanner buttons, make sure that all the software programs are installed on your computer using the
[Easy Install] option of the Setup program. See "Installing the Software" on page 2.
If the scanner buttons do not work properly, see "Troubleshooting" in the Scanning Guide.
• For Mac OS X v.10.3.x and v.10.2.x (v.10.2.8 or later): Before using the scanner buttons, you need to set Image
Capture (in [Applications] folder) to open MP Navigator EX automatically when a scanner button is pressed.
Start Image Capture, and then perform the following.
- Mac OS X v.10.3.x: Click [Options] and select MP Navigator EX 1 in [When a scanner button is pressed, open:].
- Mac OS X v.10.2.x (v.10.2.8 or later): Select [Other] in [When a scanner button is pressed, open:]. Select MP
Navigator EX 1.0 and click [Open]. Click [OK] and quit Image Capture.
6
COPY Button
Prints (copies) the scanned image with a
printer.
PHOTO/FILM Button
Opens the scanned image in the bundled
application program, ArcSoft PhotoStudio.
*
E-MAIL Button
Attaches the scanned image to a new e-
mail message.
The first time you press this button, you will be
prompted to select the e-mail program to use
with this function.