Belkin F5D6130 Benutzerhandbuch Seite 17

USING THE DISCOVERY WIZARD TO CONFIGURE THE AP
(4) Login/Logout Button
This button enables you to log in and out of the AP with the press of one
button. When you are logged into the AP, this button will change to read
"Logout". Logging into the AP will take you to a separate login page where
you will need to enter a password. When you are logged in to the AP, you can
make changes to the settings. When you are finished making changes, you
can log out of the AP by clicking the "Logout" button. For more information
about logging into the AP, see the section called "Logging into the AP".
(5) Version Info
Shows the firmware version, boot-code version, hardware version, and serial
number of the AP.
(6) LAN Settings
Shows you the settings of the Local Area Network (LAN) side of the AP.
Changes can be made to the settings by clicking on any one of the links (IP
Address, Subnet Mask) or by clicking the "LAN" Quick Navigation link on the
left side of the screen.
(7) Wireless
Shows the status of the AP's wireless setting. Changes can be made to the
settings by clicking on any one of the links or by clicking the "Quick
Navigation" links on the left side of the screen.
14