Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
Switching PurePower inverter on/off (X-com)
The PTS 230-25 has an X-com connection. This plug & play connection
is specially for the PurePower inverters by Xenteq (from 600Watt) and
provides the option of switching the inverter off or on automatically. On
the moment that the mains voltage is detected, the PTS switch box will
switch off the inverter. If the mains voltage is lost, the inverter will be
switched on again automatically. In this way the inverter is not switched
on unnecessarily, the battery will be saved and there will be no need to
switch the inverter on or off manually.
A connection cable of 1 meter is supplied with the PTS 230 -25 and is
specifically intended for connecting the PurePower inverter.
You will find a grommet on the left side of the PTS housing. Cut away the
part that is needed to feed the cable though.
Connect the cable to the RJ45 connector inside the PTS switch box.
Connect the other side of the cable to the 'remote' connector of the
PurePower inverter.
Note: set the on/off switch of the PurePower inverter to the OFF
position, otherwise this function will not work.
The PTS switch box will now switch the PurePower inverter off or on,
depending on whether mains voltage has been detected. When
switching on, the PurePower inverter will always do a short self-test
first. Therefore the 230VAC output will be present after 3 to 4
seconds.
Important
- The RJ45 connection in the PTS switch box can only be used for the
PurePower inverters!
- The RJ45 connection for the PurePower inverters can NOT be used
in combination with the also available potential free contact.
It is therefore not possible to connect and use both functions.
Simultaneous use can result in defects.
- Because the connecting cable is routed into the housing, this will
affect the IP value. The specified IP classification in the specifications
will no longer be achieved.
Potential free contact
There is also a potential-free contact within the PTS 230-25. This can
be used for all kinds of purposes, such as switching on a generator if
the 230VAC is lost, switching on/off an inverter or generating a
11
Werbung
