Main Components - Max 66715 Gebrauchsanweisung

Never put the drill down if the bit is still
rotating. Wait until it has stopped completely
before putting it down if you are not going
to use it again.
Avoid touching the drill bit immediately after
use. It may be very hot.

Main components

1. Self-tightening drill chuck
2. Torque selector (21 settings+drilling)
3. Vent holes
4. Direction selector
5. Handle
6. Battery
7
2
1
bl
9
8
6
7
7. Release button
8. On/off button (variable)
9. LED work light
10. Charge status indicator
Charging and � tting the battery
Charge the battery fully before using the drill
for the � rst time.
Press the release button (7) on the battery (6)
and take the battery out.
Insert the plug from the charger into the
charging socket on the battery. Plug the
charger in. The LED on the charger will light
up red while the battery is charging. Once
the LED turns green, the battery is fully
charged.
4
5
3
6
25
GB