Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ENG
Thank you for choosing to
purchase a product from Rusta!
Bird feeding station
Read the user manual carefully to make sure that the
product is assembled, used and maintained correctly,
as described in the instructions in this user manual.
Keep the user manual for future reference.
TO ASSEMBLE POLE
CONTENTS
1 x Bird feeding station with hooks to hang bird feeders on.
1 x Plastic bowl and 1 holder for this
1 x Seed feeder
1 x Nut feeder
1 x Suet fat ball feeder
1 x Hanging hook
IMPORTANT!
Position the bird feeding station in soft
ground, otherwise the ground will be
too hard to push the metal pole deep
enough. Push the pole at least 30 cm
into the ground to ensure it is stable.
2
Read through the entire manual
before installation and use!
TO ATTACH BRACKETS
1. Hold bracket sideways
against pole.
2. Wrap the bracket
around the pole by
tilting the bracket
45° and turn anti-
clockwise, then push
the rubber end behind
the pole.
3. The bracket should
now be secure. If you
want to re-position the
bracket, just tilt the
holder back to the 45°
angle and adjust.
3
Werbung
