Beuchat 60385 Gebrauchsanleitung Seite 34

Notice Stab 10L.qxd 12/03/12 14:42 Page 35
Implementation / Instructions for use > 35
B > Connecting the power inflator with the quick
connector:
•Complete this operation before putting the hose under
pressure.
•Push back the moveable ring on the quick connector
(see figure 6).
•Place the end of the power inflator into the connector.
•Bring the connector's ring back toward the front
(see figure 7).
•Ensure that it is properly connected by pulling lightly
on the hose.
•Place the hose under pressure by opening the air flow
and ensure that there are no air leaks.
WARNING: if you are unsure or detect a leak,
have your equipment inspected at a specialized
scuba centre.