Implementation; Attaching The Bc To The Tank - Beuchat 60385 Gebrauchsanleitung

Notice Stab 10L.qxd
32 > Instructions for use / Implementation

Implementation

1. Attaching the BC to the tank:

The BC is securely fixed to the tank by a tank band
equipped with a cam buckle that locks tightly in place
once adjusted.
This tank band is equipped with a quick release buckle
that allows for easy handling without affecting the
adjusted settings.
Putting the BC on the tank:
•Hang the BC over the tank's valve by its rear clamp.
•Place the tank band around the upper third of the
tank, using the suspension clamp at the back of the BC
to adjust to the desired height (see figure 1).
•Pass the tank band through the buckle, as shown.
12/03/12 14:42 Page 32
1/3
12L
15L
18L
1