Beuchat 60385 Gebrauchsanleitung Seite 32

Notice Stab 10L.qxd 12/03/12 14:42 Page 33
Implementation / Instructions for use > 33
•Tighten the tank band by pulling on its end.
•Close the buckle by pushing it back towards the tank
and press the remaining strap end onto the Velcro
security band (see figures 2 and 3).
Note 1: wet the tank band before mounting it on the tank, if possible.
Note 2: it is not necessary to completely undo the tank band from the
buckle after each use. After having released the buckle, loosen the
tank band enough to allow it to slide up the tank.
Note 3: use of the "quick release" buckle does not require you to
retighten the tank band after each use. To allow for tightening and
loosening, you simply need to put the hook through, or remove it
from, the metallic ring.
WARNING: ensure that your BC is securely
attached to your tank before diving by lifting it
up a couple of times. There should not be any
slippage.