Beveltools Bevel Mite ABIS-06 Betriebsanleitung Seite 6

Maintenance and check
·
Keep air tools clean and stored safely after using them.
·
When air tools need repair, air tools should be checked by the manufacturer or the licensed agent.
Repairing by the operator can cause failure and serious damage to the air tool and the operator.
·
When replacement parts are needed, only approved parts from the manufacturer should be used.
Unauthorized parts can cause failure and serious damage to the operator and the machine.
·
When special tools are needed for disassembly or re-assembly of air tools, inquire to the licensed agent or
manufacturer.
·
Vent the pressurized air out for purification from the air tank every day and mount air filter at the tank
inlet.
·
Supply proper lubricants for air tools every day to protect against the acid causing damage to inner parts.
·
Do not use improper or broken hoses or connectors.
Disposal
·
Air tools consist of steel, iron, bronze, aluminium, rubber or some others. Be careful not to contaminate
humans or environment when air tools are disposed.
RECOMMENDED ARRANGMENT OF AIR PIPING
6