Beper 90.346 Betriebsanleitung Seite 13

Hand Mixer with Rotating Bowl Use instructions
How to use the Mixer stand
Please select a fl at non-slip surface for the mixer stand.
1. Place the hand mixer on the upper section of the mixer stand. Please check whether the clip of the
upper section is locked in place on the back of the mixer.
2. Mount the hooks as described above in the section "How to use the Kneader hooks/beater".
3. In order to place the mixing bowl underneath, pull the clip to unlock the upper section of the mixer
stand and fold the mixer upwards.
4. Place the mixer bowl filled with the desired ingredients onto the revolving plate. Now fold the
mixer down again.
5. Insert the mains plug into a properly installed 230V/50 Hz safety power socket.
6. The handmixer can be used at various speeds set with the speed regulator.
7. The revolving plate turns automatically!
8. When you would like to stop mixing, turn the power level selector switch to „0" and unplug the
device from the mains.
9. When you have fi nished pull the clip again to unlock the upper section of the mixer stand and
fold the mixer upwards.
10. Now the mixer bowl can be removed. Remove the hooks as described above in the section
"Releasing the kneading hook / beater".
11. In order to separate the mixer from the upper section of the mixer stand, pull the mixer upwards.
Cleaning
• Before cleaning the equipment, always remove the mains plug from the socket.
• Only a damp cloth should be used for cleaning the outside of the machine.
• Under no circumstances should the device be immersed in water for cleaning.
• Never use abrasive detergents!
• Removable parts that have come into contact with dough (kneading attachments and mixing bowl)
can be cleaned by hand.
Technical Data
Power supply: 220-240 V, 50 Hz
Power consumption: 250 W
For any improvement reasons, Beper reserves the right to modify or improve the product
without any notice.
13