Werbung
EN
Fitting Kit
K323W
Fit rubber pad (supplied with crossbar) to
foot.
Make sure the pad fits into the holes
underneath the foot.
Carefully select desired position for
crossbars on vehicle roof.
Adjust crossbar in or out to suit vehicle.
Refer to the crossbar instructions for
crossbar adjustment.
Apply masking tape to vehicle roof in all
four positions.
Make sure there is no interference between
what you intend to carry with aerials,
sunroof or tailgate.
Place crossbar on vehicle. Minimum
recommended spacing between the bars is
700mm (27 1/2") (unless otherwise stated).
Trace around rubber pad using a pencil or
pen.
Repeat for all four positions.
5
Werbung
