Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Problem
No power
No sound
No response from the unit
RC does not work
Unit powers off after 20 minutes
24
Troubleshooting
Possible Solution
•
Ensure the mains plug is connected to a pow-
er supply, and is switched ON.
•
Make sure there is power to the mains socket .
•
Make sure if playing from the AUX input, the
external source has the volume turned up and
is playing a track .
•
Make sure the volume is turned up .
•
If using the digital coaxial or optical cable
connection ensure the source DIGITAL output
is set to PCM, LPCM, PCM 2Ch stereo or PCM
downmix.
•
Bluetooth device not paired . Check 'Bluetooth
operation'.
Unplug the power cable for 1 minute then plug back
in again
•
Reduce the distance between the remote and
main unit
•
Check the batteries are installed correctly .
•
Replace the batteries
•
Aim the remote directly at the Sound bar
This unit is designed to enter STANDBY mode auto-
matically after 20 MINUTES of inactivity. Press the
STANDBY button to wake the unit.
Werbung
Inhaltsverzeichnis
