Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
•
Press the source button
•
When selected, the 'BT' text on the display will flash while the unit tries to connect to previously paired
BT devices. If no devices are found the 'BT' text will still flash but to indicate it is ready for pairing a
new device.
•
Enable the BT function on your smart phone and search for a device labelled 'Areal Bar' in the available
list.
•
Select and enable pairing for the 'Areal Bar' device. If prompted for a password enter '0000'.
•
If pairing is successful the sound bar will beep and the 'BT' text will stop flashing.
•
If the connected device goes out of range, the sound bar will attempt to connect for 2 minutes. When
the device comes into range the sound bar will reconnect again automatically.
•
To remove the currently paired device from the sound ba r, press and hold the OPTION button for 3
seconds (19) on the remote control. The 'BT' text will begin flashing again.
•
Once connected you can either use the controls on the audio device to begin playback, skip tracks etc.
Or you can use the control buttons on the sound bar & remote.
•
Connect any USB drive (USB stick, mobile HDD, MP3 player etc.) with the USB slot on the rear.
•
Use NEXT/PREV. as well as Play/Pause to navigate through your mobile media library.
•
Press OPTION repeatedly to circle through the available playback modes: REPEAT (current track will
be played in repeat) - REPEAT ALL (repeats all al available tracks) - RANDOM (available tracks will be
played in random order).
22
BT Operation
repeatedly until you see 'BT' appear on the display.
USB Operation
Werbung
Inhaltsverzeichnis
